rewrite this content with different wording and keep HTML tags

 Car trackers have revolutionized automotive technology. The car owners can easily monitor and track the location of their vehicles. However, there are several reasons to choose a GPS tracker. It includes optimizing fleet management, vibration alarm, GEO fencing, accurate time tracking, and for enhancing security. One must know about how to install and remove GPS tracker in a car.

 Furthermore, this comprehensive article will explain the whole procedure thoroughly. It will add convenience and reliability to car owners and prevent their vehicles from any unauthorized access or theft. 

What Do Car Trackers Look Like?

Car GPS trackers vary in shape and form. Some are square or rectangular, and some have magnetic cases that they attach to. The OBD tracker consists of a plug that goes underneath the steering wheel. The hardwire tracker uses various wires. You need them to plugged into the ignition wire and the car battery. Some different types of trackers include portable GPS trackers, hardwire trackers, and plugin trackers. 

How To Install A Car Tracker?

It does not matter which kind of car you have. The process of installing a GPS in a car is easy and straightforward. However, the GPS is installed in a car to ensure interrupted signal reception. You should hide it so that nobody can mess with it or remove it. The car owners should make sure to install it so that it is covered accurately afterward. 

Tool Needed For Installation Of Car Tracker

The tools needed to install the GPS tracker are a screwdriver, wire cutter, strippers, crimping tool, electrical tape, connector, and voltmeter. Explore this step-by-step method.

Step 1: Locate The Ignition And Power Wires

First, remove the lower plastic dashboard with a screwdriver. Then, search for the two types of wires: ignition wire and constant power wire. These wires connect with your vehicle’s ignition switch. Tracing the wires down from the ignition switch can help you find these wires easily. You can use a voltage meter to double-check. It is necessary to take readings of 11 to 14 volts when the ignition wire is on and 0 volts when it becomes off.

Step 2: Hardwire Your GPS Tracker

You have to cut the small section of insulation from the constant wires by using wire cutters. However, you can use the correct gauge wire cutting gauge to avoid damaging the cables. Afterward, create the gap between the copper wires using a pick tool. The exposed end of the red wire from the tracker is threaded. However, the loose wires come in contact with the electrical tape. The whole process will repeat for the white wire connecting it to the ignition wire.

Step 3: Ground The GPS Tracker

The exposed end of your tracker’s black wire will attach to a ring terminal. Find a metal surface, like the steering column, to ground the device. Afterward, secure the ring terminal with electrical tape.

Step 4: Secure The GPS Tracker

You need double-sided tape to install the GPS tracker. You should not place it on the steering column, as GPS signals don’t travel appropriately through the metal. The ignition coil is an ideal spot. Make sure to place the tracker upward to receive the best possible signals.

Step 5: Reassemble the Dashboard

Use electrical tape to wrap any loose wires and keep them untidy. Place them so that they don’t obstruct the path. Ultimately, put the plastic cover back after hiding the tracker in the car’s interior to prevent any potential hazards.

Where Can You Install GPS Tracker In A Car?

Numerous options exist for car owners for car tracker placement. It can be installed within the front and rear car bumpers. In addition, these trackers can be placed beneath the front and rear windshields, rearview mirrors, and underneath car seats or car floor mats. The place of installment varies in terms of concealment and accessibility. It also depends upon the needs and preferences of the car owners as to where they want to install a GPS tracker.

How To Disable The GPS Tracking Device?

There are several cases of a GPS tracker. Some GPS contain wires, while others contain batteries. This article discusses the different scenarios of how to install and remove GPS tracker. So, keep reading it until you get to the bottom line.

The GPS Is Hardwired

The hardwired GPS becomes difficult to remove. Therefore, it is recommended that you seek the help of professional car mechanics, as you may need to remove the dashboard. The mechanic will accurately disconnect the wires connected to the ignition or battery. 

The GPS Is A Mini Tracker On A Battery

You need to turn the unit off to disable the battery-powered GPS. Moreover, the power button is usually located on the front or top of the unit. The lights indicate that the unit is off or on. So, once the lights are off, it means that the battery is off. If the tracker has an actual battery, then you only need to remove the battery.

Cover The Device With A Tinfoil

Another way to disable a GPS tracker is to cover the device with a tinfoil. It effectively protects the device from cellular and satellite signals.  However, it has known as one of the cheap and affordable ways. In addition, ihelps to prevent your car from theft or being tracked.

The GPS Is Not Detected Yet

Car owners can also use a GPS jammer or blocker if they are unable to locate the GPS devices. Rechargeable batteries charge these devices and disrupt the signal and prevent the transmission of a vehicle’s location. Additionally, these blockers effectively block all the signals emitted by the car tracking device.

Buy From PakWheels Seamless Car Trackers In Pakistan

PakWheels is one of the most known platforms for buying GPS trackers in Pakistan. The price typically falls somewhere between RS 2300 and RS 16,000. There are many auto accessories and auto parts available at their auto store. These include car security alarms, locks , and parking sensors. They consist of a comprehensive return and refund policy with a dedicated customer support team.

Bottomline Thoughts

In short, car owners should consider the mechanism of how to install and remove GPS tracker in a car. The installation of trackers provides convenience and prevents any unauthorized access to your car. However, they should comply with legal requirements when disabling GPS trackers to avoid any consequences. Additionally, they should consider buying trackers from PakWheels at an affordable price.